Before building a small wind turbine, we always wonder how much power this turbine will be able to generate. Will it light up our home? Is it worth an investment to be considered? If we go about with a positive decision of setting up a wind turbine we next face the question of how to build a small wind turbine.

Also if you are green supporter you should know how to build a small wind turbine you would definitely want one in your own backyard.

Wind is the major player for building a small turbine. Many of you think that you live in a windy place. However the wind force may be unsuitable for a wind turbine due to obstructions like trees or buildings.

Next question that arises is what the size of turbine is needed. Ideally to power a home we need the blades to span 5 meters from tip to tip. A smaller rotor will yield less power.

We are next put up with a query, can we make our own blades. A good amount of research will be needed. You need to make sure that you are protected against all eventualities. Now comes the turn of the generator. You don’t go in for a car alternator since the motor blades rotate at very low speeds of 100 rpm as compared to a 2000 rpm for a car shaft. The above points on how to build a small wind turbine is still in your mind whether to go for or not!

Build yourself a small wind turbine with less than 200$- Best guide reviewed.

People all over the world use wind energy to power their houses with electricity. Best guide to start using wind power as energy and make your own wind power generator if you want to save thousands of dollars on you electricity bills.

Technorati Tags: , , ,

Tags: , , ,



There are a number of wind turbines on the market that are rated as “1 KW,” but what does this mean when it comes to wind turbines? Well, first of all KW stands for kilowatt or one thousand watts. Watts are a measure of power or “energy output over time.” But what does “1 kilowatt wind turbine” mean? Does it mean that you will get 1 kilowatt of power all the time? No!

If the wind is not blowing, you will get zero power from any turbine, no matter what the kilowatt rating. The 1 kilowatt rating is based on a specific wind speed. Usually turbines are rated at a wind velocity where the conversion efficiency is highest. For instance, a turbine converts energy inefficiently at 8 miles per hour, but will be much more efficient at say 20 miles per hour. So, the kilowatt rating of a turbine usually corresponds to a wind speed of 20 miles per hour or more. These kind of wind numbers are higher than most operators will experience at their property.

For instance, there is a turbine called the Windspire that is rated as a 1 kilowatt wind turbine. If you read the specs on the turbine it says that it guarantees 1900 kilowatt hours of energy per year with an average wind speed of 12 miles per hour.

If you do the math, the turbine produces 5.2 kilowatt hours per day in an average 12 mile per hour wind. So, the turbine is not putting out 1 kilowatt at your 12 mile per hour expected average wind velocity. At 12 miles per hour, the turbine is only putting out about .22 kilowatts, or about a fifth of its rating of 1 kilowatt.

So, what does 1 KW Turbine mean? This means the turbine will put out 1 kilowatt of power at a specific wind velocity, usually greater than 20 miles per hour.

Joseph Sawvel

“Free 7-day Wind Turbine Property Assessment Course.”

Perform A Free Assessment Of Your Property’s Wind Energy Potential In Just 7 days.

Before You Spend Thousands On A New Wind Turbine, Assess Your Property For Free!

http://www.yourwindturbine.com/assessment

Technorati Tags: ,

Tags: ,



Think of a residential wind turbine and the first thing that will come to mind is an infrastructure with revolving blades that collect and utilize the air. But there is more to the workings of the residential wind turbine than this simple observation. The typical wind turbine is often installed on top of a tall tower and the turbine has the capability to collect the kinetic energy from the wind.

The collected kinetic energy from the wind is then converted to electricity that is compatible with your home’s electrical system. Most of the households that adopted this kind of energy generation activity don’t usually ignore the traditional sources of energy. The normal residential application will have a home that is simultaneously powered by the wind turbine and the local utility. That’s because at times this renewable energy provider isn’t as reliable. This is true since the power production of the wind turbine is highly dependent on wind speeds.

When the wind speed in the area is below the cut-in speed of 7 to 10 miles per hour, then there will be no power output that will come from the turbine. And you have no other option but to purchase the power from the local utility. But as the wind speeds up, then the residential wind turbine output starts to pick up and the amount of power that will be purchased from the utility decreases somewhat. This is then when the household will realize the energy savings. This reason alone motivates people to go green and add this power generator at home.

You can realize the benefits of having a residential wind turbine as well as home solar power for less than you think. Using both can drastically reduce or even eliminate your power bill.

You can keep you cost of these eco energy upgrades to a minimum if you do it yourself. And the best plans to build wind and solar energy systems to go off the grid can all be found here.


Technorati Tags: ,

Tags: ,




There’s a windmill on the corner of my block. It helps power a new home that also relies on solar and other renewable energy. But I don’t often see it revolving, and when it is spinning, the blades emit a low drone that I wonder if those living immediately around the house can hear. I also worry, perhaps irrationally, that it will claim the lives of innocent birdlife in my hood.

PacWind, a California-based wind energy company founded in 1998, has an answer to these worries. It makes wind turbines (shown here) that use vertical blades, are visible to birds and can operate even in winds that would be too high or too low to make conventional windmills work effectively, according to the company.

PacWind garnered some attention late last year after Jay Leno installed a PacWind turbine to help power his 17,000-foot garage (that’s the size garage he needs for his, like, 5 million cars). And Ricoh, the Japanese maker of copiers and camera, is installing a billboard in Times Square that is lit by lights powered 95% by PacWind turbines (and 5% by solar).

And on Wednesday PacWind got a lift through a deal with WePower, another California startup that has been involved with PacWind since late last year when the two companies began a partnership through which WePower would manufacture up to 500,000 of PacWind’s vertical axis windmills annually (and handle many of business needs, such as managing tax incentives, energy rebates and carbon credits). This week, WePower has announced it has also purchased PacWind’s patented and proprietary wind energy technologies.

Riffing off the Ricoh billboard concept, the two companies are now promoting “windvertising,” wherein a company’s logo is printed across the blades of the vertical windmill and are visible as its spins (think of how a flip-book works). So the company gets an animated billboard with no energy consumption – in fact, the billboard generates electricity while spinning, which can be fed into the grid.

WePower says that if the estimated 500,000 billboards that are currently found along US highways were to convert to windvertising and if the turbines spun at an average wind speed of 10 miles per hour, they would generate roughly 16.8 billion kWh of electricity. “At this level they could power approximately 1.5 million homes and would reduce about 5.3 million tons of CO2 from being emitted into the air per year,” it says in a press statement.

WePower might be a good company to keep an eye on, because its eyes are on much more than the advertising market: it believes its turbines are a smart alternative to large-scale windmills for generating power in tight urban corridors, like mine.

The company also just purchased distribution rights to an electrical power generator platform designed by Aura Systems.

And Forbes reports that in a meeting of the nation’s regional utility commissioners in Washington, D.C. this week, the new secretary of energy, Steven Chu, said he’ll move quickly to foster the large investments in clean energy that the stimulus bill supports. If most of the stimulus money were directed at wind energy, it would be enough to “underwrite the construction of 30,000 MW of wind power,” says Forbes, quoting Hugh Wynne, an analyst at Bernstein Research. “That’s more wind capacity added in the U.S. in two years than exists worldwide,” the article states.

Reprinted with permission from Triple Pundit.


By Triple Pundit


Technorati Tags:

Tags:



By Philip Proefrock

Wind farms are typically located in remote, sparsely populated locations. The big turbines work best when they have good access to undisturbed (and therefore faster moving) wind. So rural and off-shore locations have been the best choices. But, while they’re good for generating electricity, those aren’t the places where most of the power is needed.

In the middle of Albany NY, on top of the 41-story Corning Tower, the city’s tallest building, a small test wind turbine has been erected to study the available wind and help determine the feasibility of having larger building-mounted turbines for electricity production. The test turbine has only a 7-foot diameter and can produce just 1.5 kilowatts of electricity when spinning at full capacity. That is less than one-tenth of one percent of the power that the building uses, but it’s just for the test.

Urban settings are generally considered less desirable for wind power generation, and the swirling winds found in a city are difficult to harness efficiently (although vertical-axis turbines are better suited for winds that rapidly change direction). Wind power design guidelines typically indicate that having a higher tower means the turbine is able to reach stronger winds, which means more power generated. The tallest buildings in a city may offer access to high, unblocked (and not swirling) winds that are fairly powerful and productive.

We’ve seen some concepts for both small, building mounted turbines and other schemes for urban wind as well as examples of actual buildings with attached large turbines. There are several problems associated with building mounted turbines, ranging from noise and vibration from the turbine causing discomfort for the building inhabitants to structural loading issues associated with the added equipment. These are problems that can be solved, though. If tall buildings do offer good wind access, then more urban towers may start sporting propellers on top.

Reprinted with permission from EcoGeek
By EcoGeek

Technorati Tags:

Tags:



http://buildcheapgreenenergy.com/windpower

There’s more hope for alternative energy , and it’s not coming from the White House but from the house of ill fame. It seems that the former “Hollywood Madam” Heidi Fleiss is shelving her plans to open up Heidi’s Stud Farm in Nevada where houses of prostitution are legal in most rural counties. Instead of providing “studs” for women, she has decided that there’s more money going green than staying blue.

“That’s where the money is,” she told the Las Vegas Review-Journal. “That’s the wave of the future.” (http://www.lvrj.com/news/39357657.html)

With its stable of men, Heidi’s Stud Farm would have been the first bordello catering to women in Nevada. It’s unclear if FleissHeidi Fleiss.jpgwould turn the Stud Farm into a wind farm or solar farm, but she told the Review-Jouranl she had an alternative energy project that’s “perfect for Nevada.”

While Fleiss may have something perfect for Nevada, The Washington Post is pointing out some of the problems large-scale alternative energy plants face.

(http://www.washingtonpost.com/wp-dyn/content/article/2009/02/16/AR2009021601199.html?)

It’s not new that the big projects have big problems, which is why Americans need to think bigger by going smaller. While there’s a need and a place for the big projects, there would be less pressure if we fought this battle on a neighborhood-by-neighborhood and house-by-house level.

That’s why I like the  Residential Renewable Energy Tax Credit, homeowners can now claim a full 30% of their installation costs for new residential solar-power systems, with no cost cap. Prior to this…
By Brooks Boliek

Technorati Tags: , , , , , ,

Tags: , , , , , ,



http://buildcheapgreenenergy.com/windpower
Researchers at Los Alamos National Laboratory think they’ve proved that 1+1= more than 2, at least when it comes to solar cells. According to research published by Los Alamos scientists in a recent issue of Accounts of Chemical Research, it is  possible that solar cells can create more than one unit of energy per photon.

Victor Klimov, the scientist who led the research team, contends that their experiments prove that the phenomenon in nano-sized semiconductor crystals known as “carrier multiplication” actually exists, and isn’t just figment of some overactive imaginations or sloppy research. (http://www.lanl.gov/news/index.php/fuseaction/home.story/story_id/15709)

When a conventional solar cell absorbs a photon of light, it frees an electron to generate an electrical current. Energy in excess of the amount needed to promote an electron into a conducting state is lost as heat to atomic vibrations (phonons) in the material lattice. Through carrier multiplication, excess energy can be transferred to another electron instead of the material lattice, freeing it to generate electrical current—thereby yielding a more efficient solar cell.

Klimov_Victor.jpgKlimov and colleagues have shown that nanocrystals of certain semiconductor materials can generate more than one electron after absorbing a photon. This is partly due to strengthened interactions between electrons squeezed together within the confines of the nanoscale particles.

In 2004, Los Alamos researchers Richard Schaller and Klimov reported the first observations of strong carrier multiplication in nanosized crystals of lead selenide resulting in up to two electron-hole pairs per absorbed photon. A year later, Arthur…
By Brooks Boliek
Yaab

Technorati Tags: , , , , , , ,

Tags: , , , , , , ,



http://buildcheapgreenenergy.com/windpower

The American love affair with the car may have stalled, but that doesn’t mean the driving forces behind it aren’t trying to jump-start the relationship. (How’s that for mixed metaphors?) During a recent trade show in Western Michigan, auto parts makers think their ability to make parts for cars can be transferred into making parts for other things, like wind turbines and the other underpinnings of the “green economy.”

Dan Radomski, vice president of industry services, NextEnergy, was surprised to find that he had sell-out crowd at the Automotive Manufacturing Diversification conference at Grand Valley State University, According to Julia Bauer’s reports in The Grand Rapids Press. The event was hosted by The Right Place Inc. economic development group.

“I remember hosting supplier events just around the renewable, alternative energy industry three years ago, and we could barely get 20 people in a room,” Radomski told the crowd.

Dan Radomski of Next Energy, left, exchanges information with Robert Burger of KC Jones Plating Co. photo byEmily Zoladz

Parts for utility-grade wind turbines, the gear or direct-drive control boxes, and the massive blades could all be made in Michigan, he said. The U.S. already has 120 wind turbine manufacturers, but 50 percent of the demand must be imported. (http://www.mlive.com/business/west-michigan/index.ssf/2009/02/conference_for_auto_suppliers.html)

Making those things here could help sustain an automobile industry that is going to have to become less dependent…


By Brooks Boliek
Yaab

Technorati Tags: , , ,

Tags: , , ,



The Energy Technology Development and Demonstration Programme (EUDP) under the Danish Energy Agency has awarded BioGasol a grant for a demonstration plant with a capacity of 5 million liters of ethanol per year.
Click to read more …



President Barack Obama signed more than US $70 billion in renewable energy and energy efficiency measures into law on Tuesday as part of the American Recovery and Reinvestment Act. The bill passed both houses of Congress at the end of last week by votes of 246-183 and 60-38 respectively.
Click to read more …